18-14
IM AQ1200-01EN
18.8 Replacing an Optical Adapter
Attachment
1.
Make sure that the AQ1200 power is off.
2.
Open the optical port cover.
3.
Insert the optical adapter directly into the rear shell.
4.
Pull the optical adapter lock lever down and outwards to lock it. If the adapter is screwed in,
turn the knob to the right to tighten it.
Good example
Bad example
Note
Insert the optical adapter carefully and straight. If the adapter shakes to the left and right or is forced in or
out, it may be damaged, and the optical port ferrule may also be damaged.
