3.3 Absolute Value Measurement
IM 735201-01E
3-9
3.3.4 Displaying Maximum Values (MAX Hold)
1. Perform the operation from the initial screen in normal measurement mode
(Figure 3-1).
2. Press
the
SETUP
key. The setup mode screen appears.
3. Press
the
SETUP
key once again. The MAX hold setting ON/OFF screen
appears.
Figure 3-13
Max hold setting screen
4. Each time you press the
UP
or
DOWN
key, “
ON
” or “
OFF
” blinks. Select
“
ON
”.
5. Press
the
ENTER
key. The screen changes to the NA correction coefficient
setting screen (see Figure 3-4). The MAX hold setting is finalized.
6. Press
the
ENTER
key two times. The instrument returns to the normal
measurement mode screen.
Figure 3-14
Normal measurement mode screen when the MAX hold setting
is enabled
Note
・
・
The MAX hold and REF functions cannot be used at the same time on
the instrument.
If you turn ON the REF function while the MAX hold function is enabled,
MAX hold is cancelled and the REF function is enabled.
