IM 51011-01EN
22
Holding Data (HOLD Switch)
You can hold the measured value.
You can use this function when the measured value is hard to
read, such as when you are measuring in a dark place.
Measuring
1.
Press
HOLD
to lock the switch. The measured value is held,
and [D-H] appears.
2.
To release the hold (lock), press
HOLD
. [D-H] disappears.
5. Timer Hold (HOLD and T-H Keys)
The timer hold function makes measurements (holds the value)
after the specified time elapses.
If where you are or what you are wearing is going to affect the
measurement, you must move away from the meter. This function
enables you to set the time needed for you to move away from
the meter so that you can make accurate measurements.
51011 and 51012 timer setting: 5 seconds (fixed)
51021 timer setting: 000 to 999 seconds (as specified)
Setting the Timer (on Model 51021)
1.
Press
SET
and then
T-H
.
[SET, D-H, S] appears.
2.
Press and to enter the time (value).
The range is 000 to 999 seconds.
3.
Press
SET
to finish setting the timer. [SET, D-H, S] disappears.
The timer value will be (memorized) retained even
if you turn off the power.
Summary of Contents for 51011
Page 55: ...IM 51011 01EN 54 ...
Page 57: ......
