Yoctopuce Yocto-RangeFinder, User Manual, Page: 352 / 497

21. High-level API Reference
YTemperature temperature
→
set_ntcParameters()
temperature
→
setNtcParameters()
Configures NTC thermistor parameters in order to properly compute the temperature from the
measured resistance.
js
function set_ntcParameters( res25 , beta )
cpp
int set_ntcParameters( double res25 , double beta )
m
-(int) setNtcParameters : (double) res25 : (double) beta
pas
function set_ntcParameters( res25 : double, beta : double): LongInt
vb
function set_ntcParameters( ) As Integer
cs
int set_ntcParameters( double res25 , double beta )
java
int set_ntcParameters( double res25 , double beta )
uwp
async Task<int> set_ntcParameters( double res25 , double beta )
py
def set_ntcParameters( res25 , beta )
php
function set_ntcParameters( $res25 , $beta )
es
function set_ntcParameters( res25 , beta )
cmd
YTemperature target set_ntcParameters res25 beta
For increased precision, you can enter a complete mapping table using set_thermistorResponseTable.
This function can only be used with a temperature sensor based on thermistors.
Parameters :
res25 thermistor resistance at 25 degrees Celsius
beta Beta value
Returns :
YAPI_SUCCESS
if the call succeeds.
On failure, throws an exception or returns a negative error code.
346 www.yoctopuce.com