YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
44
•
The remote controller should be 1m (3’ 3”) away from a TV set or radio to avoid interference.
•
The operation of the remote controller must be performed within its receiving range.
•
To control the main unit, point the remote controller at the signal receiving window on the main unit to improve the
receiving sensitivity of main unit.
•
Wh
en the remote controller is transmitting a signal, the “
” icon will be blinking for 1 second. When the main unit
receives a valid command from the remote control, it will beep.
•
If the remote control does not operate normally, take the batteries out for 30 seconds, and then reinsert them. If it still
does not operate properly, replace the batteries.
•
When replacing the batteries, do not use old or different types of batteries. This may cause the remote control to
malfunction.
•
When the remote controller will not be in use for a long time, remove the batteries to avoid damage that can be
caused by corrosion.