YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
31
Installing the Panel
1. Place the panel at the unit, and latch the hooks beside and opposite of the swing louver motor.
2. Latch other two hooks.
3. Tighten four hexagonal screws under the latches approximately
5/8 in. (
15mm).
4. Adjust the panel along the direction indicated by the arrow as shown in Fig.35.
5. Tighten the screws until the thickness of the sealing material between the panel and the indoor unit reduces to
3/16 in. (5-8mm).