YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
41
Up and Down SWING:
1. In simple SWING status, press
button to adjust up and down SWING status;
2. In fixed-angle SWING status, press
button to adjust up and down SWING angle circularly as
below:
NOTE:
Up/Down SWING will operate continuously in 2 second cycles. Swing states will change accordingly to the sequence
displayed above, or switch to closed state and
state.
TURBO function
In Cooling or Heating Mode, press TURBO button to set TURBO function.
When
icon is displayed the TURBO function is on.
When
is not displayed the TURBO function is off.
When TURBO function is on, the unit operates at high speed to achieve rapid cooling or heating.
When TURBO function is off, the unit operates in normal fan speed settings.
LIGHT
The LIGHT setting will turn on and off the status display on the unit. The display
shows the unit’s present operating
status (Mode, Set Tempterature, etc.).
To turn off the LIGHT, press the LIGHT button. Press again to turn the display back on.
Viewing Ambient Temperature
In unit on status, the receiver light board or wired controller is defaulted to display the setting temperature. Press
TEMP button to view indoor or outdoor ambient temperature.
When
icon is displayed, it means the displayed temperature is set temperature.
When
icon is displayed, it means the displayed temperature is indoor ambient temperature.
When
icon is displayed, it means the displayed temperature is outdoor ambient temperature.
NOTE:
Setting temperature is always displayed on Remote Controller.
X-FAN
The X-
FAN function dries any condensation that has accumulated on the Indoor Unit’s evaporator. If you are
experiencing high humidity, or live in a humid climate, this can help prevent mildew inside the unit.
To use, when the unit is in Cool or Dry mode, press X-FAN button to set X-FAN function.
When
is displayed, X-FAN function is on.
When
is not displayed, X-FAN function is off.
Health Function
Health function is available if your unit is equipped with an ION generator. When health function is on, the ION
generator will begin operation, adsorbing dust and killing the bacteria in the air.
In unit on status, press
button to set the health function.
