3-4. Discrete adjustment features
- Brightness levels switches upward with holding the button. When the maximum or the
minimum brightness level is reached, the direction changes (after a small pause).
- The “click-and-hold” command can be also used for changing the direction of the
adjustment.
- There are five brightness levels (Min-Low-Med-High-Max), which switches with 0.7 sec.
interval.
3-5. Features of the maximum mode with fast access
- Short click returns to the previous mode (and turns the flashlight OFF if it was OFF before
using Max).
- Hold starts adjusting the brightness down with switching to basic brightness modes.
- Click-and-hold turns OFF the flashlight (always, regardless of the previous mode).
- If Max is activated by a command with holding the button (“hold” for example),
the flashlight will automatically decrease the brightness with continue holding the
button. This function can be used for scrolling the modes “from highest”.
3-6. Slots features
When using “2 clicks” and “2 hold” commands, the light does not turn off during
the execution of a command. This is done for ease of use maximum or additional mode
on these slots, without flashes when activated.
When using commands with 3 or more clicks, the light turns off before the execution of a
command.
