YippieYo CROSSBUGGY, Instructions For Use Manual

Page: 14 / 20

10
3.5 Adjusting, fitting and removing the safety harnesses
The ends of all five harness straps (two shoulder straps, two pelvic straps,
one crotch strap) are attached to the buggy by means of end brackets.
You can release all five strap ends by
turning the end brackets and passing
them with the shorter side through
the slits in the buggy then through
the slits in the seat cushion. (Fig. 12)
To fit the harnesses follow the above
instructions in the reverse order:
Pass the short side of the end bra-
ckets of the straps first through the
seat cushion/back cushion slits, then
through the slits in the buggy itself.
You can adjust the length of the
straps using the two adjusters on
the shoulder straps. Pull upwards to
shorten the straps, downwards to
lengthen the straps. (Fig. 13)
Fig. 13
Warning! Always use the safety harnesses.
Risk of injury!
Fig. 12