YippieYo CROSSBUGGY, Instructions For Use Manual

Page: 6 / 20

2
BEFORE YOU SET OFF:
• Before using the product, ensure that all the locking mechanisms are
closed:
- Ensure that the backrest is locked in place and that the two clips
around the back crossbar are closed.
- Ensure that the hinge joint on the pull-bar is locked in place and
secured with the cam lever.
- Ensure that both wheels are securely attached to the quick-release
axles in the axle tube and that both disc brakes are located between
the brake pads.
- After affixing the wheels, ensure that the hand brake/parking brake is
functioning correctly.
• Ensure that the seat cushion, the backrest cushion, the side bolsters
and the restraint system are properly attached to the buggy. The ex-
pander is for use on the carrying rack only.
• Children should only be allowed to get into/out of the buggy when it is
standing on a flat surface and when it is fully assembled and ready to
use.
• Children should be helped into/out of the buggy by an adult.
• Always apply the parking brake when children are getting into/out of
the buggy and ensure that the buggy is steady and stable.
DURING THE RIDE:
• Use the restraint system at all times.
• The buggy should be pulled by adults only. Do not let children pull it.
• Never leave children unattended in the buggy. When you park the
buggy, apply the parking brake and take the children out of the buggy.
Never park the buggy on sloped surfaces or inclines and always apply
the parking brake.