- 5 -
Warning
: to ensure smooth and safe driving of
motorcycles,
proper
wheel
balancing
is
necessary.
Do not remove or replace any wheel balancing device. If you need to balance the wheel, please
contact with the dealer or maintenance station. After the tire is repaired or replaced, wheel
balance should be adjusted.
Number of motorcycle
Vehicle identification code and engine number used for motorcycle
registration.
Vehicle identification code (VIN) product label.
The vehicle identification code (VIN) is engraved on the right side of the
frame, and the locomotive turns to the left to see (see figure 1).
Products signs
The product sign is riveted to the left of the frame riser, and
the locomotive turns to the right to see (see figure 2).
Engine no.
The engine model and factory number are printed in the bottom of the
left crankcase of the engine (as shown in figure 3).
Parts location
The position of the operating system.
①Rear view mirror
②Left composite switch parts.
③tachometer
④Speed/odometer.
⑤Front brake handle
⑥Ignition lock
⑦Switch components
⑧The throttle handle
Minimum tread depth.
Front wheel :2.0mm Rear wheel:4.5mm
VIN code
FIG. 1
Products signs
FIG. 2
Engine no.
FIG. 3
