- 25 -
be removed and grounded to prevent spark.
5. Remove the drive chain, clean it with solvent and lubricate it.
Reload the drive chain or store it in a plastic bag (which is recommended to be tied to the
frame for preservation).
6. Lubrication of all control cables.
7. Lift the frame up and make the front and rear wheels off the ground.
8. Wrap the plastic bag in the outlet of the exhaust pipe and tie it tightly to prevent moisture
entering.
9. If stored in moist or salty air, apply a thin layer of oil to all exposed metal parts. Do not
apply oil on any rubber or cushion cover.
10. Apply a layer of anti-rust oil to the finish of the paint surface.
11. Remove the battery and charge it, store it in a dry place and charge it once a month.
Do not store it in hot or cold places (below 0 or above 30).
12. Cover the motorcycle car cover (no plastic cloth or other coated materials) and store it in a
cool, dry and warm room.
Note: the vehicle should be overhauled before storing the vehicle.
Take a motorcycle after a long time.
1. Remove the car and clean the motorcycle. If the storage time is more than 4 months, the
engine oil should be replaced.
2. Check the battery power. If necessary, charge it and install it.
3. Clean the anti-rust oil in the fuel tank completely and inject new gasoline.
4. Carry out all the projects of "pre-driving inspection", and try to ride a motorcycle for a
period of time on the unbusy road to ensure safety.
Main technical parameters
