background image

Guangzhou Yingfeng Lighting Equipment Co.,Ltd

www.yf-light.com

3

4. Lamp

5R Philips/7R Osram

5. Bulb power

189W/230W

6. Strobe

1-13times/second

7. Color temperature

8000K

8. Horizontal scanning 540 degrees, Horizontal 16 bit, electronic error correction, vertical

scanning 270 degrees, vertical 16 bit, electronic error correction.

9. Gobo

17 gobo add white and stream effect,gobo electric focus function

10. Color

14 color add white and rainbow effect

11. Effect

Can transfer from beam into atomization effect

12. Panel

Control

Touch screen control and Manual control

13. Signal Control

DMX512 international standard signal

14. Safety protection: when the machine is overheating or the system malfunctioning it will

automatically cut off power supply.

4

Installation

1. Before install, please make sure the power supply is the same as the product identified.

2. The cable connecting to the main power supply must meet the requirements, should not

overload.

3. The installation must be done by professional person, fixed the light safely and reliable, and

transferred to appropriate irradiation angle.

4. Please ensure that the draft fan and exhaust channel is not blocked

5. At the bottom of the moving head light with insurance line connection hole, based on safety

reasons, please use the insurance rope which can withstand ten times the weight of the

Moving head through the insurance line connection hole for auxiliary lifting.

6. When install this equipment , please ensure that at least 1.5 meters range no extreme

inflammable and explosive items(ornaments, etc.) ensure the moving head light and the wall

interval twenty centimeters of above.

7. This product can be fixed hanging installation and put on the floor to use.

8. Based on the safety, please make sure the earth wire grounded.

9.The Pan and Tilt of this product was locked when packing, please ensure it was unlocked

before the power on.

Summary of Contents for BEAM 230











Reviews: