Yetter 6300, Operator'S Manual

Page: 6 / 36

6
ASSEMBLY INSTRUCTIONS
Hanger Bar
STEP 1
. Attach the hanger bar assembly to the 8” x 8” center frame using the 4) 1” x 11” hex bolts and 1” hex lock
nuts. The right rear bolt is also used to attach the toolbar depth indicator 6300-347. Position the assembly on the
center frame with 6300-212 toolbar flange plate w.a. hook over the drawbar flange plate. Torque the 1” bolts to 670
ft. lbs.
STEP 2
. Attach the toolbar depth gauge to the rear of the toolbar using 1) ¾” x 5” x 6-1/2” u-bolt, 6300-348 strap,
and ¾” lock nuts. Locate the depth gauge up to the right hand side of the center frame.