Yetter 6300, Operator'S Manual

Page: 33 / 36

33
6600-181 LIGHT KIT
ASSEMBLY
1. Mount amber lights, one on each side, in the top slot of the warning light bracket. The red light is mounted on
the left side in the bottom slot of the bracket. The rubber washers and nuts are provided in the lights.
2. Attach warning light bracket (2) to mounting strap with two 3/8 x 1” bolts and locknuts.
3. Mount mounting strap (8) to each end of toolbar with a mounting bracket pad (7) on the bottom of the toolbar,
two ½” bolts, lock washers and nuts.
NOTE: Five different lengths of bolts are included, choose the appropriate length of bolt for toolbar size.
4. Attach wiring harness to lights.
5. Use cable ties to strap wiring harness to toolbar at regular intervals.
KEY QTY. PART NO. DESCRIPTION
1. 6 2515-405 CABLE TIE, BLACK
2. 2 6600-263 WARNING LIGHT BRACKET W.A.
3. 2 6600-522 LAMP, AMBER W/BULB
4. 1 6600-523 LAMP, RED W/BULB
5. 1 6600-524 HARNESS, COMMON WIRING
6. 4 2502-237 3/8-16 X 1” HHCS GR 5 ZYD
7. 4 2520-255 3/8-16 LOCK HEX NUT ZYD
8. 2 6600-496 MOUNTING STRAP
9. 4 2520-352 ½-13 HEX NUT ZYD
10. 4 2525-352 ½ MED. LOCKWASHER ZYD
11. 4 2502-362 ½-13 X 5” HHCS GR 5 ZYD
4 2502-373 ½-13 X 6” HHCS GR 5 ZYD
4 2502-371 ½-13 X 7” HHCS GR 5 ZYD
4 2502-369 ½-13 X 8” HHCS GR 5 ZYD
4 2502-374 ½-13 X 9” HHCS GR 5 ZYD
12. 2 6600-446 MOUNTING BRACKET PAD