Yes737 Mega-pixel Pan/Tilt IP Camera
42
3.15.
LED Display Control
The IP CAM provides the LED Display Control function, you can enable or
disable the led display/indication on the front panel of the IP cam device. The related
settings are explained below:
1. Normal led display
– select this to enable the status led and ethernet LED display.
2. Turn off led display always
– select this to disable the status led and ethernet led
display.
3. Turn off led display after network connected
– select this then the led will display
when the Internet connection has some problem, the led display will be off when
the Internet connection is successful.
Figure 3-22: Led Control settings page
Summary of Contents for Yes737
