YesCam Yes737, User Manual

Page: 59 / 61

Yes737 Mega-pixel Pan/Tilt IP Camera
59
A:
It’s probably because the internet bandwidth (internet speed) is not big enough.
Please try to apply for a better internet connection from your Internet Service
Provider or decrease the bandwidth settings of the IP Cam. You can adjust the
bandwidth requirement of the IP Cam either from the YesCam View software or
login into the web configuration page of the IP Cam to do the modification.
9. Does the IP Cam provide the recording function?
A:
You can do the recording of the video/audio of the IP Cam from the YesCam View.
Another software YesCam Play is needed to play the recorded vide/audio files.
The camera could also do recording on Micro-SD card and NAS devices.
10. The video seems a little dark when the IP Cam is used inside the house, how
could I improve this?
A: You can increase the
“Low light sensitivity” in the “video settings” page either
through web configuration or through YesCam View settings to
“High” or “Very
high
”. This will tremendously improve the video quality in dark environment.
11.
Can I connect the IP camera directly to my PC/notebook with an Ethernet
cable?
A: If the IP camera is directly connected to your PC/notebook computer using an
Ethernet cable, the IP camera will automatically use an IP address called
“auto IP”
with IP address 169.254.xxx.xxx. If your PC/notebook computer is configured to
DHCP, it will also use an
“auto IP” address. But this will take about one minute
after the IP camera is connected to the computer and you need to make sure that
the WiFi interface on your PC/notebook computer is disabled. After about one
minute, you can run the YesCam View software to access the IP camera, the
CAM ID should be displayed on the
“auto-search” list. You can then see the video
by double clicking the CAM ID icon. But you need to know that in this situation,
other local or remote computer can not see the video.