Yes737 Mega-pixel Pan/Tilt IP Camera
16
Third, unplug the Ethernet cable
If the WiFi test is successful, you can then enable the WiFi connection by unplugging
the Ethernet cable from the IP CAM. The IP CAM will detect the Ethernet cable
unplugged condition and start the WiFi connection. After the WiFi is connected, the IP
CAM will connect to the Internet immediately.
Notice :
1. Please remember that the WiFi connection will use a different IP address, you will
need to do the “Auto Search” function in the YesCam View again to find the IP
CAM again after the WiFi is connected.
2.
If you want to switch back to the wired Ethernet connection, just plug in the
Ethernet cable into the IP CAM again. Do not need to disable the WiFi function on
the web pages.
Figure 2-9: Unplug the Ethernet cable to enable the WiFi function
2.5. Push notification
The IP CAM supports push notification when using the iPhone/iPad or Android
devices. So that when there is alarm from PIR, motion detection or sound
detection, your mobile device will receive alarm notification. You can
immediately playback the recorded video(if SD card inserted) or do a live view.
Please download the
“YesCam View” app from App Store for iPhone.
Please download the
“YesCam View HD” app from App Store for iPad.
Please download the
“YesCam View” app from Android Market for Android
devices
Summary of Contents for Yes737
