background image

2

Table 

of 

Contents 

 

 

 

Page

Important Notices to Purchaser

Warning

Features of Your New Pump...................................................................................3
The Purpose of the SuperEvac

 PLUS II Design......................................................4

Important Steps of Initial Start-up...........................................................................5
Vacuum Tips for Best Performance.........................................................................5-6
Dual Voltage Motor Power Conversion....................................................................6
Basic Troubleshooting............................................................................................7

Four Most Common Problems

Oil Leakage

The Steps to Solving 95% of All Problems

Diagnostic Chart....................................................................................................8, 9
Replacement Parts................................................................................................10, 11
Warranty and Service............................................................................................12

Check for damage immediately.
Prior to shipment, all YELLOW JACKET

®

 

SuperEvac

 PLUS II vacuum pumps are 

completely tested and inspected to assure 
compliance with Ritchie Engineering 
factory specifications.
If the pump carton is damaged, check 
contents immediately. Note damage on 
shipper’s Bill of Lading and have shipper 
sign your statement. Notify the carrier 
immediately of the damage to arrange 
inspection of the pump and packaging.

The CARRIER ALONE is responsible for 
handling and settling your claim.  Ritchie 
Engineering will cooperate in assessing 
damage if the pump is returned to the 
factory prepaid.

CARTON CONTENTS INCLUDE:

SuperEvac

 PLUS II Pump

Bottle of YELLOW JACKET

®

 SuperEvac

Pump Oil

Shoulder Strap

Locking, Removable Power Cord

Owner’s Manual

This unit generates a deep vacuum that can be harmful to human tissue. Do not expose 

any part of the human body to the vacuum.

Do not operate this unit with the exhaust blocked or restricted. Remove red shipping

cap prior to use.

Keep unit a minimum of 4” (10 cm) from objects to provide adequate cooling of motor.

Continuous sound pressure level of this unit can exceed 70dB (A).

Wear goggles and protective clothing when using this product.

Designed for use with A2L systems.

This unit is only rated as non-sparking.  Not intended for use in Zone 0 or Zone 1

hazard areas.

Warranty is void if the set vacuum pump voltage does not match the power supply.

Summary of Contents for 93714













Reviews: