background image

12

WARRANTY INFORMATION

Ritchie Engineering guarantees YELLOW 

JACKET

®

 products to be free of defective 

material and workmanship which could 

affect the life of the product when used 

for the purpose for which it was designed.  

This warranty does not cover items that 

have been altered, abused (including 

failure to use the correct type of vacuum 

pump oil) or returned solely in need of field 

service maintenance.

If found defective, we will either replace 

or repair at our option products within 

warranty period. Returns must be prepaid.
Warranty does not cover use of lithium 

bromide, ammonia or leak stop type 

products.

How to Obtain Service

Most returned pumps are merely in need of 

normal field service maintenance, such as 

changing oil or making minor adjustments.  

In many instances, the troubleshooting 

information in this manual can save you 

the time and effort of returning your 

pump.  When the information contained in 

this manual, however, does not solve the 

problem, please call for service.

©

2020 Ritchie Engineering Company, Inc.

Printed in the USA

           PN #143060_RevB

Warranty is void if the set vacuum pump voltage does not match the power supply.

Summary of Contents for 93714













Reviews: