background image

PUMP #

93714

93716

93794

9374x

PUMP #

93715

93796

9376x

PUMP #

93711

9378x

PUMP #

93790

93792

93795

93798

4 CFM

6 CFM

8 CFM

11 CFM

(113 L/M)

(170 L/M)

(227 L/M)

(311 L/M)

Mount Body

12. Complete mount body 

92753

92753

92754

92754

13. Shaft seal

93031

93031

93031

93031

14. 30” vacuum gauge

93011

93011

93011

93011

15. Vacuum gauge crystal

93012

93012

93012

93012

16. Gas ballast with “O”-ring

93368

93368

93368

93368

17. “O”-ring for gas ballast/drain plug

93398

93398

93398

93398

18. Intake fittings

92930 (3/8”) 92930 (3/8”) 92931 (1/2”) 92931 (1/2”)

19. Intake cap (1/4”)

93394

93394

93394

93394

20. Intake caps

93399 (3/8”) 

40284 (Acme)

93399 (3/8”) 

40284 (Acme)

93395 (1/2”) 

40284 (Acme)

93395 (1/2”) 

40284 (Acme)

21. Blank-off valve handle & screw only

93366

93366

93366

93366

22. Complete parts for blank-off 

93367

93367

93367

93367

Motor

23) SuperEvac Universal Motor

93713

93713

93713

93713

24) Locking IEC to NEMA 5-15

92755

92755

92755

92755

25) Locking IEC to UK

92757

92757

92757

92757

26) Locking IEC to EU

92756

92756

92756

92756

26a) Locking IEC to AU/NZ

92758

92758

92758

92758

Final Assembly Parts

27. 8/32 x 5/8” socket head cap screw

93506

93506

93506

93506

28. Oil cover gasket

92942

92942

92942

92942

29. Drive coupling

93047

93047

93047

93047

30. Coupling spider

93050

93050

93050

93050

31. Right or left leg assembly

92959

92959

92959

92959

32. Cartridge baffle

92940

92940

92940

92940

33. Shoulder strap mount

92943

92943

92943

92943

Damaged supply cords must be replaced by special assemblies available from the manufacturer or its distributors

9374x

9376x

9378x

9379x

24.6 lbs. (11.2 kg)

25.9 lbs. (11.7 kg)

26.8 lbs. (12.2 kg)

28.4 lbs. (12.9 kg)

11

Vacuum Pump Weights

Summary of Contents for 93714













Reviews: