yellow jacket 40870, User Manual

Page: 10 / 31

7
After completing a job, the datalog files can be accessed by connecting the instrument to a PC.
To connect the P51-870 TITAN® to a PC, connect the provided data transfer cable to the micro-
USB port on the back of device shown in Figures 13 and 14. Plug the opposite end into the USB
port on a PC. Ensure that the device is powered on, the PC will attempt to open the device as a
flash drive.
Datalog files are stored as .csv files and are named with the following date/time convention: last
number of year, work week, last three digits of serial number, letter convention preventing
duplicates. See Figure 15 for example of stored datalog files.
Ex. 50 th week of 2017 with device serial number ending in 127, 4 th datalog file; 750127AD
These files cannot be modified while stored on the device but can be copied from the drive to
the PC and modified using any application compatible with .csv files (Microsoft Excel, notepad,
etc.).
When the device is nearing full storage capacity, the device will prompt the user on startup with
remaining datalog time at current sampling rate. Selecting “Yes” will clear all datalog files stored
on the device. If selecting “NO”, the device will proceed to normal startup and retain all stored
Figure 15: P51-870 as Removeable Drive
Figure 13: Micro-USB
Location
Figure 14: Connecting to
the Micro-USB