TG Series User Guide
73/86
Session-timers
Enable session-timer mode, by default it is
“yes”. If you found the call
is cut off every 15 minutes , please disable this.
Session-expires
The max refresh interval.
·Session-minse
The min refresh interval, which mustn't be shorter than 90s.
Session-refresher
Choose session-refresher, the default is Uas.
Configure IAX Settings
It is wise to leave the default setting as provided on the system. However, for a few settings, you
need to change them to suit your situation.
Navigate to
Gateway > VoIP Settings > IAX Settings
to configure the SIP general settings.
Check the description of IAX settings below.
Option
Description
UDP Port
Port used for IAX2 registrations. The default is 4569.
Bandwidth
Low/medium/high with this option you can control which codec to be
used.
Min Registration Time
Minimum duration (in seconds) of an IAX2 registration. The default is 60
seconds
Max Registration Time
Maximum duration (in seconds) of an IAX2 registration. The default is
1200 seconds.
Codecs
Enable the codec you want for IAX communication.
Configure General Preferences
Navigate to
Gateway > VoIP Settings > General Preferences
to configure global settings for the
TG gateway.
Check the description of general preferences settings below.
Option
Description
Ring Timeout
The global time out value for extensions, it
’s 30 by default.
HTTP Bind Port
Port used for HTTP sessions; the default: 80.
If you change this, please reboot to take effect.
Two Stage Dialing Prompt
Choose the customized two stage dialing prompt; it
’s disabled by
default.
Summary of Contents for NeoGate TG200
Page 81: ...TG Series User Guide 81 86...