![background image](http://html1.mh-extra.com/html/yeastar-technology/neogate-tg200/neogate-tg200_user-manual_3267404069.webp)
TG Series User Guide
69/86
Configure SIP General Settings
Navigate to
Gateway > VoIP Settings > SIP Settings > General
, to configure the SIP general
settings.
Check the description of SIP general settings below.
Option
Description
UDP Port
Port used for SIP registrations, the default is 5060.
TCP Port
Port used for SIP registrations, the default is 5060.
TLS Port
Port used for SIP registrations, the default is 5061.
TLS Verify Server
When using TG gateway as a TLS client, whether or not to verify
server’s certificate. It is “No” by default.
TLS Verify Client
When using TG gateway as a TLS server, whether or not to verify
client’s certificate. It is “No” by default.
TLS Ignore Common Name
Set this parameter as
“No”, then common name must be the same
with IP or domain name.
TLS Client Method
When using TG gateway as TLS client, specify the protocol for
outbound TLS connections. You can select it as tlsv1, sslv2 or
sslv3.
RTP Port Start
Beginning of RTP port range
RTP Port End
End of RTP port range
DTMF Mode
Set default mode for sending DTMF. Default setting: rfc2833
Max Registration/Subscription
Time
Maximum duration (in seconds) of a SIP registration. The default is
3600 seconds.
Min Registration/Subscription
Time
Minimum duration (in seconds) of a SIP registration. The default is
60 seconds.
Default Incoming/Outgoing
Registration Time
The default duration (in seconds) of incoming/outgoing registration.
Register Attempts
The number of SIP REGISTER messages to send to a SIP
Registrar before giving up. Default is 0 (no limit)
Register Timeout
Number of seconds to wait for a response from a SIP Registrar
before timed out. The default is 20 seconds.
Calling Channel Codec Priority
Once enabled, when dialing out via SIP/SPS trunks, the codec of
calling channel will be selected in preference. If not, TG gateway
will follow the priority in your SIP/SPS trunks.
DNS SRV Look Up
Please enable this option when your SIP trunk contains more than
one IP address.
User Agent
To change the user agent parameter of asterisk . The default is
“TG
gateway”, you can change it if needed. The User Agent will show in
SIP packets
Summary of Contents for NeoGate TG200
Page 81: ...TG Series User Guide 81 86...