![background image](http://html1.mh-extra.com/html/yeastar-technology/neogate-tg200/neogate-tg200_user-manual_3267404030.webp)
TG Series User Guide
30/86
Connect TG Gateway to Your PBX (Account Mode)
If you choose account mode, you need to create one VoIP account on TG gateway, and configure the
following settings
Connect TG Gateway to Your PBX (Account Mode)
On your PBX, set up an outbound route for the VoIP trunk
On your PBX, set up an inbound route for the VoIP trunk
Set up a Mobile to IP Route (Account Mode)
Set up an IP to Mobile Route (Account Mode)
Connect TG Gateway to Your PBX (Account Mode)
Procedure
1.
Create a VoIP account on TG gateway.
a.
Navigate to
Gateway > VoIP Settings > VoIP Trunk
, click
Add VoIP Trunk
.
b.
Set
Trunk Type
to
Account
.
c.
Choose a protocol from the
Type
field.
When you use this account to register VoIP trunk, you should choose the same protocol.
d.
Set the account’s
Name
,
Account
and
Password
.
You need use the same account number and password to register VoIP trunk on your PBX.
e.
(
Optional
) Click
Advanced
tab, configure the advanced settings.
f.
Click
Save
and
Apply Changes
.
2.
Use the VoIP account to register a VoIP trunk on your PBX.
3.
Check the account status on TG gateway
Status > System Status > Trunk Status
.
If the account status shows , then the TG gateway and your PBX are connected.
Summary of Contents for NeoGate TG200
Page 81: ...TG Series User Guide 81 86...