Yeastar Technology MyPBX U200, Administrator'S Manual

Page: 85 / 135

MyPBX U200 Administrator's Guide
www.yeastar.com Page 85
1) General
· Ring Timeout
Number of seconds to ring a device before handling the call as per the
extension‟s Follow Me settings . Default value is 30s.
.
MAX call duration
The absolute maximum amount of time permitted for a call. A setting of 0
disables the timeout. Default value is 6000s.
.
Maximum concurrent calls
Maximum concurrent calls limits. Default value 0 means no limit
· Music on hold
Used to set hold music for the system.
Note: if you need use the „live music‟ from „Audio In‟ interface, please choose
„ external music‟ here.
· Tone Region
Please select your country or nearest neighboring country to enable the default
dial tone, busy tone, and ring tone for your region.
Note : please reboot the system to take it effect.
·
HTTP bind port/Web Access Port
Port to use for HTTP sessions; Default: 80
Note : please reboot the system to take it effect.
· FXO Mode
FXO port‟s operation mode .
· Virtual Ring Back Tone
It‟s only for GSM/UMTS /UMTS trunk. Once enabled, when the caller call out
with GSM/UMTS trunks, the caller will only hear the virtual ring back tone
generated by the system before callee answers the call.
· Distinctive Caller ID
When incoming calls are routed from ring group/queue/IVR, the caller ID
displays with the name of ring group/queue/IVR
，
for example
5503302(ringgroup_default)
Note : To display IVR's name, please press the key instead of the extension
number directly.
· Follow Me Prompt