Yeastar Technology MyPBX U200, Administrator'S Manual

Page: 18 / 135

MyPBX U200 Administrator's Guide
www.yeastar.com Page 18
5.1.3 DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a network protocol that enables
a server to automatically assign an IP address to a computer from a defined
range of numbers (i.e., a scope) configured for a given network. You can set a
local network NTP server for MyPBX here too
Note: MyPBX U200 can be working as a DHCP server, but cannot be regarded as
an router.
Figure 5-3
5.1.4 VLAN Settings
A VLAN(Virtual LAN) is a logical local area network (or LAN) that extends beyond
a single traditional LAN to a group of LAN segments, given specific
configurations.
Note:
MyPBX U200 is not the VLAN server, a 3-layer switch is still needed, please
configure the VLAN information there first, then input the details in MyPBX, so
that the packages via MyPBX will be added the VLAN label before sending to that
switch.