Yeastar Technology MyPBX U200, Administrator'S Manual

Page: 64 / 135

MyPBX U200 Administrator's Guide
www.yeastar.com Page 64
· Codecs
Define the codec for this sip trunk and its priority
Note : codec can only display when edit it after creating the trunk.
· Transport
This will be the transport method used by the SIP Trunk. This method is given by
the SIP trunk provider. The options are UDP (default) or TCP or TLS.
·
Qualify
Send check alive packets to the sip provider.
· DTMF mode
Set default mode for sending DTMF of this trunk. Default setting: rfc2833
· DOD
DOD (Direct Outward Dialing) means the caller ID displayed when dialing out,
before configure this, please make sure the provider supports this feature
· Associated Extension
The extension make call out via this Trunk will display the associated DOD.
6.3 Outbound Call Control
6.3.1 Outbound Routes
In this page, we can configure the outbound rules to control the outgoing calls.
Note:
1. The max number of outbound route is 64
2. If the dial patterns are the same in several routes, MyPBX will choose the
available routes from top to the last one.
3. When you have created a new extension, please edit the outbound route so
that he can dial out too
Figure 6-31
We can create outbound route or use the default route „pstnout‟ ( dial
9+numbers to dial out)