How to Connect Elastix to NeoGate TA FXS Gateway
http://www.yeastar.com 3/15
1. Introduction
This application note shows how to connect Elastix to NeoGate TA FXS gateway.
This guide has been tested with NeoGate TA3200 and Elastix firmware version:
2.4.0.
Two modes are available for NeoGate TA to connect to Elastix, we call them VoIP
trunk mode and Service Provider SIP/IAX trunk mode (SPS/SPX).
*You can simply choose one mode to achieve the connection.
Target
：
After connecting NeoGate TA3200 and Elastix, FXS extensions will be extended
on Elastix. Once the FXS ports are connected to Elastix, the phones connected
to the FXS ports will be treated as Elastix FXS extensions. The following features
can be achieved:
1. Make calls between the analog phone and Elastix SIP extension;
2. Receive incoming calls on the analog phones;
3. Make external calls from the analog phones using trunks on Elastix.
Description
：
IP address of Elastix: 192.168.5.178
IP address of NeoGate TA3200: 192.168.5.13
Figure 1. Connect Elastix and NeoGate TA3200
