How to Connect Elastix to NeoGate TA FXS Gateway
http://www.yeastar.com 8/15
DialPatternTemplate1(1).
Save and apply the changes, and you will see the port status is “Registered” on
"Port Status" page.
Path
: Status
→
System Status
→
Port Status
Figure 8. Port Status
Now, you are able to use the analog phone which is connected to NeoGate TA's
FXS port 1 to make calls and receive calls.
Note:
ALL outgoing calls to Elastix extensions and to external numbers through
trunks on Elastix should match the dial pattern, or calls will fail.
4. SPS/SPX Mode
If you choose this mode to connect NeoGate TA3200 and Elastix, the FXS port
will be registered as a Service Provider SIP/IAX (SPS/SPX) trunk to the Elastix.
One SPS/SPX trunk to NeoGate TA also should be created on Elastix. In this
guide, we use SIP protocol, configure one VoIP server template as SPS mode on
NeoGate TA3200 and create one Service Provider SIP trunk on Elastix.
Figure 9. Connect TA3200 and Elastix via SPS Mode
