Yealink VP59 Teams, Auto Provisioning Manual

Page: 7 / 70

Introduction
1
Introduction
Yealink IP phones are full-featured telephones that can be plugged directly into an IP network
and can be used easily without manual configuration.
This guide provides instructions on how to provision Yealink IP phones with the minimum
settings required. Yealink IP phones support FTP, TFTP, HTTP, and HTTPS protocols for auto
provisioning and are configured by default to use the TFTP protocol.
Supported Phones
The purpose of this guide is to serve as a basic guidance for provisioning Yealink IP phones.
The following table lists product names and available firmware versions for IP phones that use
auto provisioning process outlined in this guide.
Product Name Boot File
(Available Firmware
Version)
Exclude Mode
(Available Firmware
Version)
VP59 Yes (83 or later) Yes (83 or later)
SIP-T58A Yes (80 or later) Yes (83 or later)
SIP-T54W Yes (84 or later) Yes (84 or later)
SIP-T54S Yes (81 or later) Yes (83 or later)
SIP-T53W/T53 Yes (84 or later) Yes (84 or later)
SIP-T52S Yes (81 or later) Yes (83 or later)
SIP-T48G/S Yes (81 or later) Yes (83 or later)
SIP-T46G/S Yes (81 or later) Yes (83 or later)
SIP-T42G/S Yes (81 or later) Yes (83 or later)
SIP-T41P/S Yes (81 or later) Yes (83 or later)
SIP-T40P/G Yes (81 or later) Yes (83 or later)
SIP-T29G Yes (81 or later) Yes (83 or later)
SIP-T27G Yes (81 or later) Yes (83 or later)
SIP-T23P/G Yes (81 or later) Yes (83 or later)
SIP-T21(P) E2 Yes (81 or later) Yes (83 or later)
SIP-T19(P) E2 Yes (81 or later) Yes (83 or later)