Administrator’s Guide for VP530 IP
Video
Phone
18
3.
Enter the IP address, subnet mask, default gateway, primary DNS and secondary
DNS in the corresponding fields.
4.
Click Confirm to accept the change.
The web user interface pops up a dialog box to prompt that the settings will take
effect after reboot.
5.
Click OK to reboot the IP phone.
To configure network parameters manually via phone user interface:
1.
Tap ->Advanced (password: admin) ->Network->WAN Port.
2.
Press
to enter the network settings screen.
3.
Tap the pull-down list of Type and then select Static IP.
4.
Enter the parameters IP, subnet mask, gateway, primary DNS, second DNS in the
corresponding fields.
5.
Press the Save soft key to accept the change.
The IP phone reboots automatically to make the settings effective after a period of
time.
Note
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol that is used by Internet
Service Providers (ISPs) to provision Digital Subscriber Line (DSL) high speed Internet
services. PPPoE allows an office or building-full of users to share a common DSL
connection to the Internet. The Internet port on the IP phone can be configured as a
PPPoE port to connect to the Internet. Contact your ISP for the PPPoE username and
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your network administrator.
Summary of Contents for VP530 IP
