Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
34
on page
Log into the web user interface of the endpoint:
1.
Enter the IP address (e.g.192.168.0.10) in the address bar of a web browser on your
computer, and then press the Enter key.
2.
Enter the administrator user name and password.
3.
Click Login.
After you log into the web user interface successfully, you can click Logout on the
top right corner of the web interface to log out.
Administrator has full permission to access every menu in the web user interface. User
can log into the web user interface with user credentials.
The web structure tree of VC110 is shown as below, (the red highlight is hidden for users
with user credentials):
You can monitor or place calls via the web user interface. You can do the following in the
Home page.
Placing or ending calls
Viewing remote and nearby sites
Enabling the mute mode or the DND mode for a call
Changing the video input source
Adjusting the position and focus of the camera
Saving the camera preset
Capturing the video images
Note
Although the web user interface is used to initiate the call, it is the video conferencing
endpoint that is used for the call. It is not the PC running the web user interface.
Summary of Contents for VC110
