Configuring Endpoint Settings
135
To configure the automatic sleep time via the web user interface:
1.
Click on Setting->General.
2.
Select desired value from the pull-down list of Automatic Sleep Time.
3.
Click Confirm to accept the change.
To configure the automatic sleep time via the remote control:
1.
Select Menu->Basic.
2.
Select desired value from the pull-down list of Automatic Sleep Time.
3.
Press the Save soft key to accept the change.
When the endpoint is idle, the display device displays shortcut keys and the status bar.
The status bar displays time and date, site name, IP address, SIP and H.323 account
(when SIP and H.323 account are registered). You can hide the endpoint IP address.
The hide IP address parameter is described below:
Parameter
Description
Configuration Method
Hide IP address
Enables or disables the endpoint
to hide IP address.
Default: Disabled
Web User Interface
Summary of Contents for VC110
