Yealink Teams Series, Administrator'S Manual

Page: 71 / 112

| Phone Customization | 71
Note:
For VP59 Teams phones, if you disable the power saving feature, the phone will automatically enter
power-saving mode toprotect the screen when the phone is inactive for 72 hours. Image persistence may be
caused on LCD if power saving is disabled.
The following table lists the parameters you can use to configure power saving.
Parameter features.power_saving.intelligent_mode <y0000000000xx>.cfg
Description
It enables or disables the power saving intelligent mode.
Permitted Values 0
-Disabled, the phone stays in power-saving mode even if the office hour arrives
the next day.
1 -Enabled, the phone will automatically identify the office hour and exit power-
saving mode once the office hour arrives the next day.
Default 1
Parameter features.power_saving.enable <y0000000000xx>.cfg
Description
It enables or disables the power saving feature.
Note
: It is only applicable to VP59 phones.
Permitted Values 0
-Disabled, the phone automatically enters the power-saving mode to protect
the screen when the phone is inactive for 72 hours. Image persistence may be
caused on LCD.
1
-Enabled
Default
1
Web UI Settings > Power Saving > Power Saving
Parameters features.power_saving.office_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before
phone enters power-saving mode during the office hours.
Example
:
features.power_saving.office_hour.idle_timeout = 600
The phone will enter power-saving mode when it has been inactivated for 600
minutes (10 hour) during the office hours.
Permitted Values
Integer from 1 to 960
Default 120
Web UI Settings
>
Power Saving
>
Office Hour Idle TimeOut
Parameters features.power_saving.off_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before IP
phone enter power-saving mode during the non-office hours.
Example :
features.power_saving.off_hour.idle_timeout = 5
The IP phone will enter power-saving mode when it has been inactivated for 5
minutes during the non-office hours.