Yealink SIP-T4X, Administration Manual

Page: 188 / 466

Configuring Advanced Features
173
5. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.
6. Click OK to reboot the IP phone.
To configure the DHCP VLAN discovery via web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of DHCP VLAN
Active.
3. Enter the desired option in the Option field.
The default option is 132.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.
5. Click OK to reboot the IP phone.
To configure VLAN for Internet port (or PC port) via phone user interface:
1. Press Menu->Advanced (password: admin) ->Network->VLAN->WAN Port (or PC
Port).
2. Press or , or the Switch soft key to select the desired value from the VLAN
Status field.
3. Enter the VLAN ID (1-4094) in the VID Number field.
4. Enter the priority value (0-7) in the Priority field.
5. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of
time.