Yealink SIP-T46S User Manual Download Page 183

Page: 183 / 239

Advanced Phone Features

173

Press or the

Hold

soft key while recording, recording is paused. Then

appears

on the LCD screen and the duration stops counting. Both you and the callee are not
recorded.

Press the

Resume

soft key to resume the call, the recording is continued.

Press while recording, the muted party is not recorded.

If there is insufficient free space (30 minutes left) on the USB flash drive during recording,
the LCD screen prompts the following:

Press the

Cancel

soft key to return to the previous screen.

If there is insufficient free space (10 minutes left) on the USB flash drive during recording,
the LCD screen prompts the following:

Press the

Cancel

soft key to return to the previous screen.

If no free space of the USB flash drive during recording, recording is stopped and saved on the
USB flash drive automatically. The record soft keys disappear. You cannot record a call unless
the space of your USB flash drive is released.

Note

When you end a call while recording, the recording will be stopped and saved as *.wav files on
the USB flash drive automatically.

You can transfer or set up a conference call while recording. All the calls are recorded in the same
way and will be saved in as a “.wav” file.

Summary of Contents for SIP-T46S
















































































































































































































































Search results

Summary of Contents for SIP-T46S

Reviews:

Related manuals for SIP-T46S

Brands by name

Popular brands

Yealink SIP-T46S, User Manual

Search results

Summary of Contents for SIP-T46S

Reviews:

Related manuals for SIP-T46S

Brands by name

Popular brands