Yealink SIP-T46S User Manual Download Page 160

Page: 160 / 239

User Guide for the SIP-T46S IP Phone

150

It is configured for the

Retrieve

soft key. This park retrieve code will also apply to the

retrieve park key.

Click

Confirm

to accept the change.

Note

To park a call in FAC mode:

During a call, press the

Park

soft key (You may need to press the

More

soft key to see the

Park

soft key) or the call park key (if configured).

If the call park code is not configured, you need to enter the call park code (e.g., *68).

Press , or the

Park

soft key.

If the

Park

Retrieve

soft key doesn’t appear on the LCD screen, please select

Disabled

from

the pull-down list of

Custom Softkey

via web user interface at path

Settings-

Softkey

Layout

Summary of Contents for SIP-T46S
















































































































































































































































Search results

Summary of Contents for SIP-T46S

Reviews:

Related manuals for SIP-T46S

Brands by name

Popular brands

Yealink SIP-T46S, User Manual

Search results

Summary of Contents for SIP-T46S

Reviews:

Related manuals for SIP-T46S

Brands by name

Popular brands