Getting Started
27
2.
In the IPv4 Config block, mark the DHCP radio box.
3.
Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4.
Click OK to reboot the phone.
To configure static DNS address when DHCP is used via web user interface:
1.
Click on Network->Basic.
2.
In the IPv4 Config block, mark the DHCP radio box.
3.
Mark the Static DNS radio box.
4.
Enter the desired values in the Primary DNS and Secondary DNS fields.
5.
Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
6.
Click OK to reboot the phone.
Summary of Contents for SIP-T2XP
