Yealink SIP-T2XP, Auto Provisioning Manual

Page: 127 / 158

Appendix
121
Parameter
Permitted
Values
Descriptions Web Setting Path
The default value is 1.
features.dsske
y_blind_tran =
0 or 1
It enables or disables the phone to
perform a blind transfer by pressing
the predefined transfer DSS key.
0-Disabled
1-Enabled
The default value is 1.
features.relog
_offtime = Integer from
1 to 1000
It configures the web access timeout
(in minutes).
The default value is 5.
features.direct
_ip_call_enabl
e =
0 or 1
It enables or disables the phone to
make an IP call directly.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->Allo
w IP Call
features.allow
_mute =
0 or 1
It enables or disables the phone to
during an active call.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->Allo
w Mute
features.ringer
_device.is_use
_headset =
0, 1 or 2
It configures the ringer device for the
phone in the headset mode.
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
The default value is 0.
Features->Audio-
> Ringer Device for
Headset
features.factor
y_pwd_enabl
e =
0 or 1
It enables or disables the phone to
prompt for the administrator password
when you long press the OK key to
perform factory reset.
0-Disabled
1-Enabled
The default value is 0.
features.picku
p.group_picku
0 or 1
It enables or disables the phone to
display the GPickup soft key when the Features->Call
Pickup->Group