Yealink SIP-T2XP, Auto Provisioning Manual

Page: 115 / 158

Appendix
109
Parameter
Permitted
Values
Descriptions Web Setting Path
1-Enabled
The default value is 0.
push_xml.sip_
notify =
0 or 1
It enables or disables the phone to use
the push XML via SIP NOTIFY message.
0-Disabled
1-Enabled
The default value is 0.
Features->Remote
Control->SIP Notify
features.actio
n_uri_limit_ip
=
IP address
or any
It configures the IP address of server
from which the phone receives the
action URI requests.
Multiple IP addresses are separated
by commas.
If it is set to any, the phone will receive
action URI requests from any server.
If it is left blank, the phone will not
receive action URI requests.
The default value is blank.
Features->Remote
Control->Action
URI allow IP List
dialplan.area
_code.code =
Number
It configures the area code.
The default value is blank.
Settings->Dial
Plan->Area
Code->Code
dialplan.area
_code.min_len
=
Integer from
1 to 15
It configures the minimum length of the
number prefixed with the area code.
The default value is 1.
Settings->Dial
Plan->Area
Code->Min Length
(1-15)
dialplan.area
_code.max_le
n =
Integer from
1 to 15
It configures the maximum length of
the number prefixed with the area
code.
The value must be larger than the
minimum length.
The default value is 15.
Settings->Dial
Plan->Area
Code->Max
Length (1-15)
dialplan.area
_code.line_id
=
(X ranges
from 1 to 6.)
Integer
It configures lines applying the area
code.
Multiple line IDs are separated by
commas.
The default value is blank.
Settings->Dial
Plan->Area
Code->Account