Yealink SIP-T2XP, Auto Provisioning Manual

Page: 71 / 158

Appendix
65
Parameter
Permitted
Values
Descriptions Web Setting Path
network.dhcp.
start_ip =
(not
applicable to
SIP-T19P and
SIP-T20P IP
phones)
IP address
It configures the start IP address of the
DHCP IP segment.
The default value is 10.0.0.10.
Network->PC Port
->PC Port Config
->As Router->Start
IP Address
network.dhcp.
end_ip =
(not
applicable to
SIP-T19P and
SIP-T20P IP
phones)
IP address
It configures the end IP address of the
DHCP IP segment.
The default value is 10.0.0.100.
Network->PC Port
->PC Port Config
->As Router->End
IP Address
network.intern
et_port.speed
_duplex =
0, 1, 2, 3 or 4
It configures the transmission mode
and speed of the Internet (WAN) port.
0-Auto negotiate
1-Full duplex 10Mbps
2-Full duplex 100Mbps
3-Half duplex 10Mbps
4-Half duplex 100Mbps
The default value is 0.
Network->
Advanced->Port
Link-> WAN Port
Link
network.pc_p
ort.speed_dup
lex =
0, 1, 2, 3 or 4
It configures the transmission mode
and speed of the PC (LAN) port.
0-Auto negotiate
1-Full duplex 10Mbps
2-Full duplex 100Mbps
3-Half duplex 10Mbps
4-Half duplex 100Mbps
The default value is 0.
Network->
Advanced->Port
Link->PC Port Link
network.vlan.i
nternet_port_e
nable =
0 or 1
It enables or disables VLAN of the
Internet (WAN) port.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->
Advanced->VLAN
->WAN Port->
Active