Yealink SIP-T2XP, Auto Provisioning Manual

Page: 11 / 158

Getting Started
5
The parameters commonly edited in the Common CFG file are described as follows
(Take SIP-T2xP IP phones as examples):
####################################################
## Common CFG File ##
####################################################
#!version:1.0.0.1
##The file header “#!version:1.0.0.1” is not a comment and must be placed in the first
line. It cannot be edited or deleted. ##
#Configure the transmission mode and the speed of the WAN port.
#0-Auto negotiate (default), 1-Full duplex 10Mbps, 2-Full duplex 100Mbps, 3-Half
duplex 10Mbps, 4-Half duplex 100Mbps;
network.internet_port.speed_duplex =
#Configure the user name and password for PPPoE connection.
#Require a reboot
network.pppoe.user =
network.pppoe.password =
#Enable or disable the PC port; 0-Disabled, 1-Auto Negotiation (default);
#Require a reboot
network.PC_port.enable =
#Configure the PC port type; 0-Router, 1-Bridge (default)
#Require a reboot
network.bridge_mode =
#Configure the IP address and mask when the PC port is configured as Router.
#Require a reboot
network.pc_port.ip =
network.pc_port.mask =
network.pc_port.speed_duplex =
network.pc_port.dhcp_server =
network.dchp.start_ip =
network.dchp.end_ip =
#Enable or disable Plug and Play feature; 0-Disabled, 1-Enabled (default)
auto_provision.pnp_enable = 1
#Configure the domain name of the PnP server.
auto_provision.pnp_domain_name =
#Configure the auto provision mode;