Triggering the IP Phone to Perform the Auto Provisioning
37
configuration files for different IP phones. To access the specified directory, you
need to provide the correct user name and password configured for the directory.
4.
Configure unique activation codes and the provisioning server URLs on IP phones.
The activation code can be numeric characters, special characters “#”, “*” or a
combination of them within 32 characters.
The following are example configurations in the configuration file for IP phones:
autoprovision.1.code = *123
autoprovision.1.url = tftp://192.168.1.30/T23G_1/
autoprovision.2.code = *456
autoprovision.2.url = tftp://192.168.1.30/T23G_2/
5.
Send the specified activation code, associated user name and password to each
end-user.
6.
The user can set up the IP phone, and then input the activation code after the
phone startup.
The LCD screen will prompt the following dialog box:
7.
Press the OK soft key to trigger the IP phone to perform auto provisioning.
The LCD screen will prompt the following input box:
8.
Enter the user name and password in the User Name and Password fields
respectively.
The entered user name and password must correspond to the directory where the
configuration files of the IP phone are located. If you enter invalid user name or
password, the LCD screen will prompt the message “Wrong user name or
password!”. The prompt message will disappear in two seconds, and the LCD
screen will return to the idle screen. You need to input the activation code again to
trigger the auto provisioning process.
