Triggering the IP Phone to Perform the Auto Provisioning
35
2.
Click Autoprovision Now.
The IP phone will perform the auto provisioning process immediately.
You can activate more than one method for auto provisioning. For example, you can
activate the “Power On” and “Repeatedly” modes simultaneously. The IP phone will
perform the auto provisioning process when it is powered on and at a specified interval.
The IP phone will perform the auto provisioning process when receiving a SIP NOTIFY
message which contains the header “Event: check-sync”. Whether the IP phone reboots
or not depends on the value of the parameter “sip.notify_reboot_enable”. If the value is
set to 1, or the value is set to 0 and the header of the SIP NOTIFY message contains an
additional string “reboot=true”, the IP phone will reboot immediately. For more
information on the parameter “sip.notify_reboot_enable”,
refer to
. For W56P, refer to
Yealink IP Dect Phones
Description of Configuration Parameters in CFG Files.xlsx
.
This method requires server support.
