| Troubleshooting |
73
The System Camera of MVC300/MVC300
Ⅱ
is Not Available
If you purchase UVC30 camera and do not set it as the content camera, the UVC30 camera can only be
used as the system camera for MVC300/MVC300
Ⅱ.
Check whether you set UVC30 camera as the content
camera or not.
Procedure
1.
Tap
More
>
Setting
.
2.
Enter the administrator password (default: sfb) to go to the Settings page.
3.
On the Peripherals page, do not select
Yealink UVC30 Camera
in the field of Content Camera
(Preview).
4.
Tap
Save and exit
.
Cannot Control the Camera
If you enable the tracking mode, you cannot control the camera. See
enable the manual control mode.
Does the MVC/MVC
Ⅱ
System Come with All the Necessary Software Pre-installed?
The MVC/MVC
Ⅱ
system comes with factory imaged Windows 10 IoT and is installed with all the
necessary software. The only requirement is Teams, Skype for Business or Lync credentials to run on the
MVC
Ⅱ
system. For more information, refer to
The Room Is Not Enabled for Teams Meetings
You should enable Teams meeting mode on your system before using the Teams meetings.
Procedure
1.
Tap
More
>
Setting
.
2.
Enter the administrator password (default: sfb) to go to the Settings page.
3.
In the Account page, select
Skype for Business (default) and Microsoft Teams
or
Skype for
Business and Microsoft Teams (default)
from the
Supported meeting mode
field.
