| Basic Settings of Teams Room Systems |
59
4.
Press the navigation keys to pan or tilt the camera.
Note:
The settings among the cameras of MVC940/MVC900/MVC900
Ⅱ
are independent of
each other. In other words, other cameras' settings remain unchanged, even though you change
the settings of one camera.
Related tasks
Resetting the Camera to Home Position
When UVC30 Room camera is in manual control mode, you can reset the camera to home position. For
UVC84/UVC80/UVC50/UVC40, you can reset the camera to home position at any time.
Procedure
1.
Tap
to page to the Camera Control page.
If you are in a meeting, tap
>
to enter the Camera Control page.
2.
If you use MVC940/MVC900/MVC900
Ⅱ,
select the corresponding UVC84/UVC80 camera.
3.
Tap
Reset
.
Note:
The settings among the cameras of MVC940/MVC900/MVC900
Ⅱ
are independent of
each other. In other words, other cameras' settings remain unchanged, even though you change
the settings of one camera.
Related tasks
Creating the Preset Position on the Yealink RoomConnect Plug-in
Presets are the pre-saved settings of both the angle and the focal length for the camera. You can use it to
quickly point a camera at a pre-defined location. Note that only the administrator has the permission to use
Yealink RoomConnect.
Procedure
1.
Log in as an administrator.
2.
Run
Yealink RoomConnect
.
3.
Tap the camera and then select
Preset Position
.
4.
If you use MVC940/MVC900/MVC900
Ⅱ,
select the corresponding UVC84/UVC80 camera.
5.
Tap the navigation keys to pan or tilt the camera.
6.
Tap
or
to zoom in or out the camera.
7.
Tap
New Preset
to create a new preset.
Note:
If you are using the Yealink Room Connect for the first time, tap
Skip
to manage the
devices locally, or you can manage the devices on the Yealink Device Management Platform
or Yealink Management Cloud Service. The settings among the cameras of MVC940/MVC900/
MVC900
Ⅱ
are independent of each other. In other words, other cameras' settings remain
unchanged, even though you change the settings of one camera.
For more information on how to use the Yealink RoomConnect plug-in, refer to
Related tasks
