5
Configure a Static IP
The following introduces how to use the remote control to configure a static IPv4 address:
1. Select
More
->
Setting
->
Network
->
Wired Network
(Default Admin Password:0000).
2. Select
IPv4
from the pull-down list of
IP Mode
.
3. Select
IPv4
, and then press OK key.
4. Disable
DHCP
.
5. Enter the IP address, subnet mask, gateway and DNS information in corresponding fields.
6. Save the change
.
The screen prompts “
Reboot now?
”.
7. Select
OK
to reboot the
endpoint
.
Network Environment
Bandwidth Requirements
Both downlink bandwidth and uplink bandwidth should meet above requirements.
The bandwidth mentioned above is based on a video call. In order to ensure better call quality, we
recommend using 4Mbps bandwidth.
Video Resolution
Recommended Bandwidth
4Kp30/1080p60
4Mbps
People Content 1080p60
4Mbps
Do one of the following to deploy the endpoint:
Option1
: Assign a static public IP address to your endpoint.
Option2
: If you deploy the endpoint in an Intranet (behind the firewall), assign a static private IP
address to it and configure port mapping on the firewall.
Option3
: Deploy the endpoint using intelligent traversal. You only need to assign a private IP
address to your endpoint. Make sure this private IP address can access the public network.
Only outbound calls are available when using this method.
Traditional Deployment
Network Deployment
Choose Cloud deployment or traditional deployment according to your need.
Cloud Deployment
Cloud deployment does not require complex network settings. You only need to get account
information from your system administrator, and log into the video conference platform.
Do the following to log into the video conference platform via remote control:
1. Select
More
->
Login
->
Advanced
(Default Admin Password:0000)->
Video Conference Platform
.
2. Enable
Cloud Account
.
3. Select the desired platform from the pull-down list of
Platform Type
.
4. Configure the desired platform and log in.
