Yealink CP925 User Manual Download Page 31

Page: 31 / 93

Yealink CP925 User Guide

Enabling/Disabling the DND Mode for a Conference Call

You can enable the DND mode for a conference call, as a result, the conference call will not be disturbed by the
incoming calls.

Procedure

Select

DND

to enable the DND mode.

Select

DND

again to disable the DND mode.

Network Conference

If your system administrator has set a network conference feature on your phone, you can initiate a conference with
two or more contacts.

Topic

Setting Up a Network Conference

Setting Up a Network Conference

You can set up a network conference with multiple parties.

Procedure

Place a call to the first party.

When the first party answers the call, select

Invite

Do one of the following:

Enter the number of the second party, and then select

Invite

Select

Call multiple members? Click here >>

, enter the number of the new party, and then select

Add Mem-

bers

Repeat the step above until you add all intended parties.

Select

to call all intended parties at the same time.

The conference is set up after the intended parties answer the call.

Note

: The Procedures for setting up a network conference call on specific servers may be different from the introduction

above. Contact your system administrator for more information.

Recording Using a USB Flash Drive

You can record active calls onto a USB flash drive connected to your phones, and the recordings are saved as
*.aac files.

Recording using a USB flash drive is not available by default. Contact your system administrator for enabling this
feature for you.

Note

: Yealink CP925 phones support USB flash drive in FAT32 only.

Topics

Recording a Call
Pausing/Resuming a Recording
Stopping a Recording
Viewing the Available Recording Time

Recording a Call

You can record the important parts during an active call.

Important

: Before call recording, especially those involving PSTN, it is necessary to know about the rules and restrictions of

Summary of Contents for CP925






























































































Search results

Summary of Contents for CP925

Reviews:

Related manuals for CP925

Brands by name

Popular brands

Yealink CP925, User Manual

Search results

Summary of Contents for CP925

Reviews:

Related manuals for CP925

Brands by name

Popular brands