YDI EtherAnt II, User Manual

Page: 5 / 28

EtherAnt II User’s Manual
an Ethernet cable up to a maximum length of 100 feet between the unit and the DC Power Injector). The
WLAN device located in the antenna gets its power from the DC Power Injector which puts DC power
onto the Ethernet cable.
Both the EtherAnt II and the EtherAnt II –LR version operate from a 15 VDC power supply. A 110 VAC
adapter is included with the EtherAnt II package, and a 110/220 VAC “laptop-type” adapter can be
purchased separately as an option. The EtherAnt II –LR version comes standard with the 110/220 VAC
“laptop-type” adapter.
1.2 EtherAnt II Client Adapter Features
Key Features
•
802.11b radio and Ethernet Converter built into the antenna (-LR models feature also a built-in
amplifier that extends the maximum covered range)
•
WiFi™ compatible
•
Ideal solution for providing Wireless Internet access to distant clients
•
Communicates with any WiFi™ compatible Access Point
•
Weatherproof: designed and rated for outdoor use
•
Connects directly into PCs without installing device drivers
•
Supports direct connection to LANs via built-in Micro-routing
•
Provides extended range coverage by focusing the radio signal
•
Antenna is lightweight and thin, just one inch thick and 14 inches square
•
Can be mounted in either vertical or horizontal polarization
•
Mounts either to a wall or antenna mast of up to 1 3/4 inches in diameter
•
Flat panel antenna offers 18 dbi gain and 15 beamwidth
•
Transmit power of 2 Watts EIRP and 16 Watts EIRP on –LR model
•
Up to 4.5 Mbps actual throughput
•
FCC Part 15 Certified for license-free operation (11 channels in USA)
•
Professional installation is not required by FCC Part 15 rules
•
Easy-to-run outdoor-rated Ethernet cable provided (50 feet standard, can be optionally extended
up to 300 feet for standard series and up to 100 feet for –LR models)
•
DC power for electronics in the antenna are carried up the Ethernet cable (Power Over Ethernet,
POE)
•
Windows-based Configuration Software
•
Client Manager shows signal, noise and SNR levels in dB
•
Remotely configurable and Manageable based on IP address
•
Operating range: -20 C to +50 C
•
Ethernet interface – The EtherAnt II connects to an existing Ethernet port on the PC, so new
driver installation is not required as long as a compatible Ethernet port driver is loaded. Once the
EtherAnt II is connected, simply install the Client Manager from the CD-ROM and configure the
network settings.
•
18 dBi Gain Antenna – This high-gain directional antenna provides long-range wireless
connectivity.
•
Installation – Part 15 FCC Certification does not require professional installation. However,
someone who is experienced in installing devices outdoors should do the installation.
•
Ideal for Cable/DSL Routers – The EtherAnt II plugs into the WAN port on a client router to
service a LAN.
•
802.11b compliant – The EtherAnt II is WiFi™ compatible and will work with any certified
802.11b compatible Access Point (AP) or Client Station. This includes ORiNOCO Access Points
Version 3.3 Page 2 March 2003